Tesla unveils Powercore, a solid-state transformer that replaces a transformer, inverter and breaker and cuts faults in 100 microseconds
Tesla introduced Powercore on November 17, a solid-state medium-voltage unit that combines a transformer, inverter and breaker, delivering 7.4 MW continuously at 34.5 kV with a built-in solid-state breaker that clears faults in 100 microseconds. Made in America and operating in 2027, it targets solar, storage, AI data centers and EV charging as conventional transformer lead times stretch up to four years. Elon Musk quoted the launch himself.
Tesla's energy storage account, @Tesla_Megapack, posted at 16:00 UTC on November 17 (midnight November 18 in Beijing) to introduce Powercore, a single box that combines a medium-voltage transformer, an inverter and a circuit breaker, all built from solid-state power electronics. Tesla's headline numbers: 7.4 megawatts (9 MVA) of continuous output on a 34.5-kilovolt AC grid, grid-forming support with up to 10 MVA of peak power, made in America, operating in 2027. About 46 minutes later Elon Musk quoted the post: "Advanced solid state transformers at scale from Tesla." By 01:10 Beijing time his quote had been viewed about 550,000 times.
First, what a transformer does. Power from plants, solar farms and battery sites is stepped up to very high voltage for long-distance transmission, then stepped back down in stages near where it is used. Transformers do that job, and the basic design has not changed in more than a century: thick copper windings around an iron core, changing voltage by electromagnetic induction at grid frequency. Big units are often filled with insulating oil and weigh tens of tons. Solar panels and batteries produce direct current, so a project also needs inverters to turn it into alternating current before the transformer, plus separate switchgear (breakers) to cut power when something fails. That means several large pieces of equipment on every site.
A solid-state transformer takes a different approach. Instead of relying mainly on a massive iron core, it uses silicon carbide and other power semiconductors as fast switches, converts the power to high frequency, isolates it through a much smaller high-frequency transformer, and outputs DC or AC as needed. The result is less equipment, a smaller footprint and active control over voltage and frequency. Powercore does the inverter, transformer and breaker jobs in one unit. In an exclusive interview with pv magazine USA, Tesla's head of energy and charging, AJ Booth, said it accepts 800 to 2,000 volts DC and connects to AC grids from 10 to 34.5 kilovolts. Tesla says it runs from -40°C to 55°C (-40°F to 131°F) and can carry a warranty of up to 25 years.
The eye-catching part is the built-in solid-state breaker. Tesla calls it the industry's first integrated solid-state circuit breaker for this kind of equipment and says it can clear a fault in 100 microseconds, a ten-thousandth of a second. "We can interrupt faults a thousand times faster than traditional equipment," Booth said. The shorter a fault current lasts, the lower the risk of fire and damage to people and hardware.
Why would Musk personally promote a transformer? Because transformers are holding back grid construction. pv magazine USA notes that tight supplies of key materials for conventional transformers have pushed lead times as long as four years, a bottleneck for grid upgrades and new clean energy. AI data centers, solar farms, battery sites and EV charging stations are all waiting for grid equipment, and some finished projects sit idle until a transformer arrives. For everyday people, that means new data centers and power plants come online more slowly, and the cost of expanding the grid eventually shows up in electricity bills. Booth said Tesla has built about 3 terawatts of power converters, all designed and made in-house, and wants to use that capability to route around the conventional transformer supply chain.
Powercore targets four groups. For solar farms, it takes high-voltage DC straight from the panel arrays, supporting today's 1,500-volt plants and emerging 2,000-volt designs, so owners can skip separate inverters and transformers. For storage, it connects to Tesla's Megapack batteries through DC bus connectors, and the two can arrive on site pre-assembled to cut field wiring. For data centers, it converts medium-voltage grid power into the 800-volt DC that server racks need in a single step instead of several; 800-volt DC is the architecture NVIDIA is pushing for next-generation AI data centers. pv magazine USA reports Tesla is working with NVIDIA to certify Powercore under NVIDIA's DSX Ready program for next-generation data center equipment. It is also aimed at EV charging. Tesla is showing the product this week at the RE+ 2026 clean energy show in Las Vegas, US.
There are clear gaps. Electrek points out that Tesla has so far shared only basic power ratings, with no efficiency figures, price, factory location or launch customer. And "operating 2027" means large-scale deployment on real grids is still some time away.
Tesla is not alone. In the US, Heron Power, founded by former Tesla senior vice president Drew Baglino, is building its own solid-state transformer, the Heron Link: about 5 MW per unit with a published efficiency of 98.6%, a factory under construction in Morgan Hill, California, US, planned output of 10,000 units a year, volume production targeted for late 2027, and several named data center and energy customers. Per unit, Powercore carries roughly 50% more power. In China, Science and Technology Daily reported that in July the industry's first commercial solid-state-transformer DC power project for a computing center went into operation at Chindata's Sangyuan cloud computing base, converting 10 kV AC to 800 V DC in one step at 98.5% efficiency and using less than half the floor space of a conventional setup.
What it means for ordinary people: if solid-state transformers can be mass-produced the way Tesla and its rivals hope, new power plants, data centers and charging stations could connect to the grid faster, and grids would gain a quicker, more flexible tool for keeping voltage steady. The next things to watch are when Tesla publishes efficiency and pricing, and how the first units perform once they start running in 2027.
Share this article
What do you think of this story?
Anonymous feedback, up to 5 reactions per article.
Reader comments
Comment without signing in, or sign in to display your member name.
Discuss the technology and the story. Hate, politics and war, threats, abuse, personal accusations, sexual content, ads, links and personal information are not allowed.
No comments yet. Be the first to share.