LandSpace says all 9 recovered Zhuque-3 Y2 engines passed a 185-second firing in Huzhou, China, and are cleared for reuse
On Nov. 20, 2026, LandSpace (蓝箭航天空间科技股份有限公司) said all nine engines from the first successful land recovery of its Zhuque-3 (ZQ-3) Y2 rocket have completed ignition tests and are ready to be used again. China Media Group reporters at a rocket-engine test stand in Huzhou, Zhejiang, China, recorded a roughly 185-second firing that included different thrust and mixture-ratio conditions. Hu Pengrui, deputy director of LandSpace’s propulsion test department, said the nine engines still function normally, their data are consistent, and they meet delivery conditions when compared with pre-flight data. The company said the inspected and repaired engines will be assigned to later Zhuque-3 flights, but it did not give a reflight date.
They had already flown once. Then they were lit for 185 seconds. On Nov. 20, 2026, LandSpace (蓝箭航天空间科技股份有限公司) said all nine engines from the first successful land recovery of its Zhuque-3 (ZQ-3) Y2 rocket had completed ignition tests and were ready to be used again. That day, China Media Group reporters walked into a rocket-engine test stand in Huzhou, Zhejiang, China, and recorded a recovered engine being fired again: in a test lasting about 185 seconds, the engine had to run through multiple conditions, including different thrust levels and mixture ratios, with liquid oxygen and methane producing a blue exhaust plume. Hu Pengrui, deputy director of LandSpace’s propulsion test department, said the test had two purposes: to verify assembly quality after the engines were put back together, and to collect real performance data after flight. In his account, the nine engines still function normally, their data are consistent, and they meet delivery conditions when compared with pre-flight figures, so they are “fully ready for reuse.” The company said the engines have already been inspected and repaired and will be delivered to later Zhuque-3 launch vehicles. It did not announce a reflight date, and it did not disclose how long the refurbishment took, which parts were replaced, or what the work cost.
At 7:35 a.m. Beijing time on Aug. 19, Zhuque-3 Y2 lifted off from the Dongfeng Commercial Space Innovation Test Area; around 7:41 a.m., the first stage landed as planned on the Zhuque-3 landing pad in Minqin County, Gansu, China. LandSpace’s official news release that day said this was China’s first recovery of an orbital-class first stage on landing legs, and the first land recovery of an orbital-class first stage in the country. The second stage placed the Honghu-03 (鸿鹄03) satellite, built by Hong Qing (鸿擎科技), into its intended orbit. A China National Space Administration notice circulated the same day also noted that on July 10, 2026, the Long March 10B first stage had been successfully recovered with a sea net — a different recovery method that should not be treated as the same as this landing-leg recovery. In the previous industrial cycle, SpaceX’s Falcon 9 made the first successful landing of an orbital-class first stage on Dec. 21, 2015, and did not fly a recovered orbital-class booster again until the SES-10 mission on March 30, 2017. What Zhuque-3 cleared today is a post-flight acceptance test, not a second launch. LandSpace’s official product page describes Zhuque-3 as a reusable liquid-oxygen-and-methane launch vehicle, with nine Tianque (天鹊) TQ-12B engines on the first stage and one TQ-15B vacuum engine on the second. The same page says the first stage “may be reused up to 20 times” in the future — a company target, not a figure already achieved. The Nov. 20 test reports did not name the engine model; the model used here comes from the official product page.
The binding constraint is not whether a flown engine still looks new. It is whether LandSpace is willing to deliver those nine engines for another flight. At the test stand, reporters were shown Y2 engine No. 8, whose exterior, they said, was hard to tell from a new one. Engineers stressed that after the heat, vibration, and landing shock of flight, what changed inside still has to be found by inspection and repair. Hu split the 185-second firing into two ledgers: assembly quality after remounting, and performance data taken after flight and reassembly, across multiple operating conditions, then aligned with the pre-flight baseline before the engine can be called ready for delivery. Jiao Yamin, head of comprehensive planning at LandSpace’s propulsion manufacturing base, pointed to a harder constraint: the most difficult decision is how far to inspect — which parts must be checked, which must be replaced, and in what condition an engine can still be flown. Those standards, he said, have to be built from real flight data. The team hopes that after several refurbishment-and-reuse cycles, the process can be simplified to a brief inspection at the recovery site followed by another flight; that is a later goal, not what was demonstrated this time. Varying thrust and mixture ratio over 185 seconds puts a flown engine back through conditions close to a delivery acceptance test. Because the company has not published a parts-replacement list or a refurbishment cost, there is still no basis for calculating how much money one reuse would save.
What can be said today is that the nine flown engines have an acceptance result that allows them to be delivered again. The next layer is whether they are actually installed on a later Zhuque-3 and ignited again on a real mission. The parties immediately in line are LandSpace’s own reuse-verification schedule and satellite customers still waiting for a lower launch price: if these engines really fire again, the company would not have to build an entirely new first-stage engine set for the next flight. The limit of that judgment is clear. “Ready for reuse” is not the same as commercial repeat flights already underway, and it is not the same as a lower published price. For other Chinese rocket teams still working through recovery, this is a checkpoint they can compare against: after a land landing comes engine refurbishment and re-acceptance. The team that first turns “a simple check at the recovery site, then fly again” into a routine is the one more likely to change launch cadence and cost. SpaceX already flies recovered first stages at high frequency; that comparison marks a path and a gap, not a claim that today’s test has closed it.
iHolyshit review
I am not watching how pretty the 185-second plume looks. I am watching whether these nine engines actually fly again in the next six to 12 months, and whether refurbishment shrinks from a full teardown and retest in Huzhou to the simple recovery-site inspection Jiao described. Before November 2027, two things can be checked: whether at least one Y2 recovered engine appears on a later Zhuque-3 operational flight, and whether LandSpace publishes an actual reuse turnaround time, not just the phrase “ready for reuse.” If the engines pass acceptance and then sit on the ground, today’s statement is still a test-stand result. If they do fly again, but every reuse still has to come back to Huzhou for a full 185-second acceptance firing, the cost-cutting step that matters has not been taken yet.
Share this article
What do you think of this story?
Anonymous feedback, up to 5 reactions per article.
Reader comments
Comment without signing in, or sign in to display your member name.
Discuss the technology and the story. Hate, politics and war, threats, abuse, personal accusations, sexual content, ads, links and personal information are not allowed.
No comments yet. Be the first to share.